Jigs are essential for woodworking especially for repetitive pieces. When involved in complex projects jigs can make the work a little faster. Jigs can be purchased or made. They are typically very inexpensive however; to save even more money it is a good idea to make your own from scrap wood. A wide variety of jigs is necessary when involved in many different types of projects.
There are a few different types of jigs. Dovetails are used for making a dovetail joint correctly and accurately. These can be purchased or made from a template. The templates can be found in most stores as well as on the internet. The typical template will allow for twelve different sizes. For this, a router and a saw for dovetails are essential. Dovetail jigs can be used for cabinets, drawers, and boxes. Often bits and templates will come together for a project. This can also save money rather than buying these components separately. The dovetail saw is used to cut dovetails as well as fine joints. The thinner blade on the saw will allow for more accurate cutting.
Dewalt 18 Volt
Then there is a dowel jig. This is used for making dowels. A self centering woodworking jig should be used when thick timber is the wood of choice. The sizes vary from about a quarter of an inch to about half an inch. Again, kits are available with the dowel jig and hundreds of dowels of different sizes. The kits can even include glue.
The kreg jig is essential for cabinet making. This allows for drawers to slide flawlessly. They also save time because the drawer slides do not need to be measured and marked. Therefore, the metal drawer slides become easier to install. Although expensive, the equipment is essential for the making of drawers because it makes the process quicker and flawless. The tool can be used for center, bottom, or extension drawers.
When making your own jigs it is best to use inexpensive wood and materials because they are often not used for more than one project. Expensive wood would be a costly waste. Plywood is often used. However, if the jigs are going to be used for several projects, then it is best to make them from a harder and stronger wood. Instructions for jig making can be located in books, online, and even in magazines. The instructions found on the internet can be printed and then used with ease. It is good practice to keep all of these instructions in a binder or case so they can be used for reference material later on. A hint for this is to use plastic page covers to ensure the instructions are not damaged over time.
Christmas Sales DEWALT Bare-Tool DCD950B 1/2-Inch 18-Volt XRPHammerdrill/Drill/Driver 201
Dec 11, 2011 19:33:40
Click for larger image and other views
Christmas Sales DEWALT Bare-Tool DCD950B 1/2-Inch 18-Volt XRPHammerdrill/Drill/Driver Feature
- Patented 3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time
- Heavy-duty 1/2-inch self-tightening chuck tightens throughout operation providing superior bit gripping strength
- LED worklight provides increased visibility in confined spaces
- High power, high efficiency motor delivers 450 unit watts out of max power for superior performance in all drilling and fastening applications
- Best in class length for improved balance and better control; tool only, no battery
Christmas Sales DEWALT Bare-Tool DCD950B 1/2-Inch 18-Volt XRPHammerdrill/Drill/Driver Overview
Featuring an easy-handling length rated best-in-class for improved balance and better control, the DEWALT DCD950B 1/2-Inch 18-Volt XRP Hammerdrill/Drill/Driver packs a powerful punch in a heavy-duty industrial design. Powered by any DeWalt battery, this cordless tool keeps things simple and efficient with user-friendly features and a patented three-speed, all-metal transmission.
|
 This hammerdrill / drill/driver has three speeds for all kinds of fastening and drilling applications. View larger. |
Whether you're tackling a heavy-duty professional job like electrical rough in or basic fastening and professional maintenance, you'll appreciate the versatility and dependability of the DEWALT DCD950B 18-Volt XRP Hammerdrill/Drill/Driver. It offers 22 clutch settings, and the 1/2-inch metal, self-tightening chuck tightens throughout operation providing superior bit-gripping strength.
Its stand-out feature is its patented triple speed range (0-500, 0-1,250, 0-2,000 rpm) and a corresponding triple speed range for hammer drilling (0 - 8,500, 0 - 21,250, and 0 - 34,000 bpm) which makes it easy to match the correct speed to the job.
Efficient, Powerful Motor for Robust Operation
The DCD950B owes its robust performance to a high-power, high-efficiency motor that delivers 450 unit watts out of maximum power for superior performance in all drilling and fastening applications.
Lightweight, Compact Design for Tight Spaces
Weighing in at just 3.9 pounds (without battery), the DCD950B lets you work all day without putting excessive strain on wrists and hands. Its compact size also makes it easy for you to drill in tight spaces like under sinks, and in corners or a closet.
Powered by Convenient, Long-Lasting XPR Batteries
The DCD950B uses any DeWalt 18-volt batteries - ideally XRP, which power the entire DEWALT line of 18-volt tools allowing users to run multiple tools off of the same battery packs.
Warranty Information
The DEWALT DCD950B 1/2-Inch 18-Volt XRP Hammerdrill / Drill/Driver is backed by a limited three-year warranty, 90-day money-back guarantee, and one-year free service contract.
What's in the Box
1/2-inch Hammerdrill/Drill/Driver, 360-degree side handle, and manual.
SAVE NOW on Christmas Sales Offers below!
Available In Stock. |
| This Christmas DEWALT Bare-Tool DCD950B 1/2-Inch 18-Volt XRPHammerdrill/Drill/Driver ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
